The engine of Shramjeevi Express failed on Sunday at Kashi railway station. Due to this the train stood for one hour and 50 minutes. Due to this the passengers had to face a lot of problems. At the same time, most of the passengers who got down from Cantt railway station got down at Kashi railway station and left by auto.
The Shramjeevi Superfast Express train going from Rajgir to New Delhi left from Pandit Deen Dayal Upadhyay Junction for Cantt Railway Station. The train reached Kashi Railway Station at 3:20 pm. Meanwhile, while going to the goods train from platform number one, the train had to be stopped when the line was not cleared.
When the line was cleared after the departure of the goods train, the loco pilot agreed to take the train. But, the paints of the train’s electrical engine stopped working. This information was given in the station and control room, after which another engine was sent from Cantt railway station, then the train left for Cantt railway station at 5:10 pm.
At the same time, the train, which was already running late, reached platform number five at Cantt railway station at 5:20 instead of 3:02. Passengers were upset due to the train standing at Kashi station for about two hours. In these, most of the passengers who got down at the Cantt railway station left by auto.
On platform number five of Cantt railway station, passengers were also upset due to the delay after getting information about the arrival of the train. Superintendent of Kashi railway station KK Singh said that the train was standing due to engine failure. The second engine was dispatched after arrival.
Expansion
The engine of Shramjeevi Express failed at Kashi railway station on Sunday. Due to this, the train remained standing for one hour and 50 minutes. Due to this, the passengers had to face a lot of problems. At the same time, most of the passengers who got down at Cantt railway station got down at Kashi railway station and left by auto.
The Shramjeevi Superfast Express train going from Rajgir to New Delhi left from Pandit Deen Dayal Upadhyay Junction for Cantt Railway Station. The train reached Kashi Railway Station at 3:20 pm. Meanwhile, while going to the goods train from platform number one, the train had to be stopped when the line was not cleared.
After the departure of the goods train, the line was cleared and the loco pilot agreed to take the train. But, the paints of the train’s electrical engine stopped working. This information was given in the station and control room, after which another engine was sent from Cantt railway station, then the train left for Cantt railway station at 5:10 pm.